Posts Tagged ‘coolant’
Caring for Your Radiator
There are some things that most often lead to leaks in the radiator. Namely: corrosion (rust), collision (either due to collision or due to hit the radiator fan switch). Especially for the fiber material, other causes are heat and pressure of water in the radiator. Due to these causes, it may be voids or gaps formed in the plates (fiber), the radiator where the water was seeping out. Because the leaky radiator, the cooling system is not working properly. As a result, the engine temperature was not controlled and there was overheating when the engine continues to be forced to work without cooling. We certainly had memorized when the engine overheating. Because of the heat that exceeds tolerance, the engine may not sound normal, less powerful, wasteful of fuel, even broke down while driving in the middle of the road. Too bad, right? Before experiencing problems like that, Anticipate the occurrence of leaks in the radiator. Prevention can be done by treating the cooling system. For this, there are a few tips that we recommend:
1. Perform regular checks on water radiator reserve tank. If the surface water in the tank below the MIN, add soon. If you’ve looked dirty and looks cloudy, drain and replace with a new radiator water.
2. Use a special radiator fluid when filling the radiator (coolant). In addition to helping the cooling process, in the liquid also contained a substance that can reduce corrosion on the radiator and engine. Corrosion and dirt on the cooling water is not very good because it can interfere with the cooling process. We suggest using a water glycol coolant manifold ethlylene high quality.
3. Clean the radiator grille with a spray water on the radiator fins.
Tips for Keeping Your Motorcycle in Top Condition
For many riders, their motorcycle is their pride and joy, which means they are keen to look after it in the best way possible.
Whether you are buying used motorcycles or just want to keep your new ride running as well as it did the day you left the showroom, you may find some of the following suggestions helpful.
Motorcycles need regular maintenance, especially if they are being ridden frequently, and there are some checks that you should perform each time you are planning to take your bike on the road.
Always have a look at the oil and coolant levels and if necessary, top them up. You should keep an eye out for any damp patches or stains on the ground under your bike as this could indicate that there is a leak somewhere.
You should also measure your tyre pressure and ensure that both wheels are filled to the manufacturer’s recommended specifications. As well as making the treads on the tyres last longer, this will also help prevent damage to your suspension.
Brakes are another key component to keep in good working order – you should regularly assess the pads so that you can replace them when they are beginning to wear.
It is worth remembering that you should not need to fully depress the foot pedal or completely pull back the lever to get the brakes to engage, so if you find you are having to do this, get them checked out.
The drive chain should be properly lubricated at all times – and when you are doing this you can also make sure that it is properly adjusted and not too loose.
How to Keep Your Vehicle Running Smoothly
Keeping your automobile running smoothly and efficiently may help you avoid costly repairs and possible breakdowns. Whether you are a do-it-yourself kind of person or one who relies on the knowledge and skills of a professional auto mechanic, routine car maintenance is essential to the performance and longevity of your vehicle. Listed below are some general car care tips that should help you keep your vehicle in top performance.
Keep your tires inflated. Underinflated tires waste gas by increasing road friction and forcing your car’s engine to work harder. Improperly inflating your tires can cause the tread to wear unevenly.
Change your oil. Dirty or low oil can cause engine parts to grind together, causing damage and putting you at risk for engine failure. Conventional oil should be replaced every 3000 miles while synthetic oil should be changed every 6000 miles.
Replace your air filter. An air filter will prevent dirt particles from entering your engine and possibly causing damage. Replacing your air filter routinely will ensure that your vehicle is receiving plenty of clean air to run efficiently.
Flush and fill your radiator. Your car’s cooling system needs to be flushed and filled with antifreeze to extend the life of the engine. The radiator protects the engine from overheating during hot summer months by circulating coolant through the engine block area. Fresh coolant also lubricates seals and protects against corrosion in heater cores.
Clean fuel injectors. Over time, dirt and contaminants from fuel system deposits can inhibit accurate fuel flow and can lead to poor engine performance and costly repairs.
Change differential fluid. Old or contaminated fluid loses its ability to protect the metal components and clutch plates in your differential. This can lead to worn or even broken ring and pinion gears, leaving your car immobile.
